Return to Photocell Extension Cord (10ft.) | Garden Lights & Landscape Lighting
Sort By::
Page of 1


  0 of 0 people found the following review helpful:
 
1 of 5 photo cell extension cord June 26, 2016
Reviewer: Anonymous Person from celina, OH United States  
needs better quality heat shrink tubing.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 Photocell extension cord connector doesn't match October 6, 2015
Reviewer: Alan Wexler from Malibu, CA United States  
I received the photocell and the extension cord,  unfortunately the connectors between the two don't match. I had to break off the plastic connectors on the ends and manually splice the wires together. That made it work.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 Photo Cell Install September 3, 2015
Reviewer: R  
I was able to get the connector through the threaded base plate for the photo cell but it took a bit of effort and u actually had to twist and use the threads to move it through so no big issue there. However one of the connectors was installed backwards and I ended up having to cut it off and do a manual splice which kind of negated the plug and play idea of the extension. Over all however very pleased with the lights. Very high quality!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Great option October 2, 2013
Reviewer: Captain low vol from Tracy CA  
This is a great extension if you need it. It does not fit inside a 3/4 inch ENT. You will need a 1inch ENT if running from an indoor mounted transformer.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Excellent product and service September 21, 2013
Reviewer: Fourlls from CorvallisOR  
Only issue is connector does not fit easily thru bronze base..but people at volt told me how to remedy

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 Faulty Construction October 23, 2012
Reviewer: Disappointed from St. Louis Misso  
Connections on both ends separated upon installation. Required extensive repair.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
1 of 5 Disappointing - not LLW/Volt quality September 24, 2012
Reviewer: Andrew from Kansas City MO  
I purchased this to remote mount my photocell.  The connectors fit perfectly with the photocell.  However all the connectors are too large to fit through any preformed holes in surface mount plates or standard threaded connections.  The biggest disappointment was the heat shrink tubing.  The tubing won't shrink small enough to create a water tight seal with the wiring going into the connectors.

Was this review helpful to you?

   
 
(Your shopping cart is empty)
Built with Volusion
Choose Your Options
1 of 1